Description: You can change the time and date mode by pressing the SET button singly, making your operation more convenient. There is designed with built-in Li battery, which will memory the time even if the battery is blackout, you can use it without worries. The light is designed with 3 levels for choosing, you can adjust the light according to your like without worries because the clock is energy-saving and eye-protecting. This clock also could display the humidity and temperature at the same time, and the large number is easy to watch, you can order without troubles. This wood clock also is a good decoration for home, office, school and other places, decorating your place beautiful and attractive.
Specification: Material: board inner, wood surface. Color: black, white. Size: 15cm*4.5cm*7cm. Power adapter: output: AC110V-240V, 50/60HZ, DC5V/500MA-1000MA. Power supply: 1.Connect the clock to socket.(not charge). 2.4x AAA batteries when the electricity is blackout.(battery not included) 3.Connect the clock to other USB devices such as computer, power bank, etc. Clock setting: 3 sets of clocks can be set per day, and 1min at a time, and the voice is DIDIDI. Week ring setting: long press the SET button, ON E is turn on and it will not ring at weekend, E is turn off and it will ring everyday. 12/24 hours: you can switch over the 12/24 hours system, but it defaults 24 hours system. Calender: from 2000-2099, 100 years totally. Voice control: Under the power saving mode, it can rouse display when voice is in the close range or larger than 60dB. Switchover of the power saving mode: pressing the DOWN button, ON: sd is switch on, --: sd is switch off. Light adjustment: long press the UP button for 3 seconds to display L1 of normal brightness, short press DOWN button to display L2 of lower brightness, short press the DOWN button again to display L3 of being lowered again, press the UP button to increase the brightness. After setting, long press the UP button for 3 seconds to exit the setting. Reset: Press the RESET button to restore the factory settings when the machine crashes due to incorrect operation or improper operation.
Note: The temperature of the wood clock comes from the electronic induction of the internal microdigital chip, so it can not be compared with the professional thermometer. Generally, the difference of 1-3 degrees is normal value. Due to the light and screen difference, the item's color may be slightly different from the pictures. Please allow slight deviation for the measurement data and make sure you do not mind before ordering.
Package included: 1x clock. 1x USB cable. 1x introduction.