Giới thiệu 1 Miếng Dán Hình Gấu Đáng Yêu Cho Xe Hơi
Material:PVCIt's not paper@) Sheet size: About305*210MM
one.Installation method of small car sticker (dry sticker method)
1Clean the car body and keep it dry.
2Determine the position to be pasted. In general, slowly stick and use at the same time Scrape the tool flat and expose the backing paper on one side.
3If the figure is really small, you can also tear off the transparent transfer film and stickers and stick them again. But care must be taken to avoid accidental adhesion.
4After sticking, scrape and press repeatedly. The transparent transfer membrane was removed.
two.Installation method of large vehicle sticker (wet sticker method) Tools: rags, sprinklers, scrapers or credit cards
1Clean the car body and sprinkle water evenly on the parts to be pasted to reduce the viscosity of the sticker and facilitate the adjustment of the position.
2Determine the position to be pasted. Slowly while sticking, while gently scraping with tools, while uncovering paper. 3When meeting the door handle or anti friction strip, cut and wrap the material according to the situation In.
4After the general position of the figure is confirmed, the water and bubbles are scraped off repeatedly. The transparent transfer membrane was removed.
5Do not let the car sticker and the car body have any separation or protrusion.
6Try to let the moisture in the sticker dry thoroughly. If possible, heat and dry it moderately. According to Weather conditions, wash the car in a day or two.
Hình ảnh sản phẩm
1 Miếng Dán Hình Gấu Đáng Yêu Cho Xe Hơi1 Miếng Dán Hình Gấu Đáng Yêu Cho Xe Hơi1 Miếng Dán Hình Gấu Đáng Yêu Cho Xe Hơi Giá EVERY